do not scale from this print seaf-xx-xx.x-xx-xx-x-a-xx-k-tr no of positions ****-10, ***-15, *****-19, -20, -25, -30, -40, -50 (per row) option lead style -05.0: .199[5.06] height -06.0: .238[6.05] height -06.5: .258[6.55] height -07.5: .297[7.54] height **-08.0: .317[8.05] height (see table 1) plating specification -l: light gold in contact area, matte tin on tail (use sub-c-209-xx.x-l-x) -sm: selective gold in contact area, matte tin on tail. (use sub-c-209-xx.x-s-x) -s: selective gold in contact area, matte tin on tail. (use sub-c-209-xx.x-s-x) -1: 63% tin / 37% lead charge tail (use sub-c-209-xx.x-s-1) -2: 95.5% tin/3.8% silver/.7% copper charge tail (use sub-c-209-xx.x-s-2) -3: 63% tin / 37% lead crimp tail (use sub-c-305-xx.x-x-1) (see fig 15, sht 6) (only available on -05.0, -06.0, -06.5 & -07.5 lead styles) -4: 95.5% tin/3.8% silver/.7% copper crimp tail (use sub-c-305-xx.x-x-2) (see fig 15, sht 6) (only available on -05.0, -06.0, -06.5 & -07.5 lead styles) solder composition & style row -04: 4 rows (see fig 12, sht 5) -05: 5 rows (see fig 6, sht 3) -06: 6 rows (see fig 5, sht 3) -08: 8 rows (see fig 1) -10: 10 rows (see fig 2, sht 2) ** = not released for production. *** = only available with body height -05.0 and -10 row. **** = 10 position only available in 4 row *****=only available with -06.5 lead style and -06 row. =only available with -05.0 and -06.5 lead style and -04 row =only available with 30 pos & 4 row -lp: latch post option (see fig 13, sht 5) (only available with -o5.o lead style, 4, 6, 8 & 10 rows) **-n: notch (see fig 7, sht 4) (only availible in seaf-30-05.0-xx-06-x-xx) **-rp: retention pin (see fig 16, sht 5) (only available with -o5.o lead style, 6, 8 & 10 rows) -pp: polarization pin (see fig 17, sht 5) (only available with -o5.o lead style, 6, 8 & 10 rows) alignment pin (see fig 3, sht 2) (see note 6) (see note 13) polyimide pad (see fig 4, sht 2) (see note 7) tape & reel (see notes 8, 9 & 10) ar .421 10.69 ref .361 9.17 ref (no of pos x .050[1.27]) + .170[4.32] ref (no of pos x .050[1.27]) + .229[5.82] ref .033 ref 0.84 .125 3.18 ref (no of pos x .050[1.27]) + .210[5.33] ref .074 1.88 ref .033 0.84 ref (no of pos -1) x .0500[1.270] (typ) .200 5.08 ref .100 2.54 ref (typ) .0500 (typ) 1.270 .156 ref 3.96 "a" "a" fig. 1 -08: 8 row (seaf-30-05.0-xx-08-1-a-xx-k-tr shown) (all contacts, polyimide not shown for clarity) c c c l c l 08 01 "a" ref (no of pos - 1) x .0500[1.270] (typ) .050 (typ) 1.27 'b' c c seaf-xx-xx.x-08 .035 .005 0.89 0.13 (typ) .017 0.42 (ref) .044 (typ) 1.12 .050 ref (typ) 1.27 't' section "a"-"a" scale 4 : 1 c l c l c c l sub-c-209-xx.x-x-x solder charge .016 .003 0.40 0.08 (see table 8) "j" (typ) c c detail 't' scale 8 : 1 c * = not tooled c sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .050 pitch socket array assembly by: seaf-xx-xx.x-xx-xx-x-a-xx-k-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 05/27/2004 6 1 sheet scale: 2:1 insulator: lcp, color: black contact or terminal: copper alloy f:\dwg\misc\mktg\seaf-xx-xx.x-xx-xx-x-a-xx-k-tr-mkt.slddrw notes: 1. represents a critical dimension. 2. minimum pushout force: .75 lbs. 3. note deleted. 4. 5 row solder tails are not symmetrical with body width (dim .321[8.15]); see fig. 6, sheet 3). 5. inspect dimension at 4 corners of part. 6. without -a available for existing customers only as of revision y. 7. polyimide pad will be supplied whether or not -k is specified. 8. tape & reel will be supplied whether or not -tr is specified. 9. for quantities up to 49 pieces, no leader, trailer, or reel will be supplied. for quantities of 50 - 124 pieces, no leader or trailer will be supplied. 10. attach label "seax-0001" to each tape & reel package. 11. see recommended footprint drawing for stencil requirements. 12. solder charge volume is .891 x 10^-5 in ^3 ref. 13. for vita requirements, -a pin should not be ordered. 14. slot orientation must be as shown. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 revision ar
.521 13.23 ref .461 11.71 ref .172 ref 4.37 .225 ref 5.72 .300 7.62 ref .100 2.54 ref (typ) fig 2 -10: 10 row (same as fig 1, except as shown) (seaf-30-05.0-xx-10-1-a-xx-k-tr shown) (all contacts, polyimide not shown for clarity) c l c l 10 01 seaf-xx-xx.x-10 .050 1.27 ref (typ) .044 ref 1.12 .040 1.02 ref (no of pos x .050[1.27]) + .141[3.58] ref -a: alignment pins (same as fig 1, except as shown) (seaf-30-05.0-xx-08-1-a-xx-k-tr shown) (all contacts, polyimide not shown for clarity) fig 3 "f" ref 'e' seaf-xx-xx.x-xx-a c l "b" "d" .020[0.51] "c" .020[0.51] c l c l .044 1.12 ref .034 0.86 ref detail 'e' scale 6 : 1 .004 0.10 (see note 5) "e" detail 'b' scale 7 : 1 c c (see note 5) see table 4 .044 1.12 ref .034 0.86 ref dot applicator-kapton tape: use -04 row: k-dot-.138-.250-.005 -05/-06 row: k-dot-.236-.343-.005 -08 row: k-dot-.325-.450-.005 -10 row: k-dot-.404-.500-.005 fig 4 -k: polyimide pad (seaf-30-05.0-xx-08-1-a-xx-k-tr shown) (same as fig 1, except as shown) (all contacts not shown for clarity) (hand place use k-850-650) detail 'e' alternate construction scale 6:1 sheet of .050 pitch socket array assembly by: seaf-xx-xx.x-xx-xx-x-a-xx-k-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 05/27/2004 6 2 sheet scale: 2:1 revision ar f:\dwg\misc\mktg\seaf-xx-xx.x-xx-xx-x-a-xx-k-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
.323 8.20 ref .261 6.63 ref .040 ref 1.02 .029 ref 0.72 .028 ref 0.71 .172 ref 4.37 .100 ref 2.54 .050 1.27 ref (typ) fig 5 -06: 6 row (same as fig. 1, except as shown) (seaf-20-05.0-xx-06-1-a-xx-k-tr shown) (all contacts, polyimide not shown for clarity) c l c l 06 seaf-xx-xx.x-06-x -01 .028 ref 0.71 .172 ref 4.37 .261 6.63 ref .100 ref 2.54 .050 1.27 ref (typ) fig 6 -05: 5 row (same as fig. 5, except as shown) (seaf-20-05.0-xx-05-1-a-xx-k-tr shown) (polyimide not shown for clarity) c l c l 05 01 seaf-xx-xx.x-05-x "f" "f" .321 ref 8.15 (see note 4) .072 1.83 (see note 4) .128 3.25 (see note 4) section "f"-"f" sheet of .050 pitch socket array assembly by: seaf-xx-xx.x-xx-xx-x-a-xx-k-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 05/27/2004 6 3 sheet scale: 1:0.333333 revision ar f:\dwg\misc\mktg\seaf-xx-xx.x-xx-xx-x-a-xx-k-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
1.795 45.59 ref .224 5.69 ref .130 3.30 ref .033 0.84 ref "g" "g" section "g"-"g" .040 1.02 ref fig7 **-n: notch option (same as fig 3, except as shown) (seaf-30-05.0-xx-06-1-a-n-k-tr shown) (-05.0 lead style only) (all contacts, polyimide not shown for clarity) ** = not release production sheet of .050 pitch socket array assembly by: seaf-xx-xx.x-xx-xx-x-a-xx-k-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 05/27/2004 6 4 sheet scale: 2:1 revision ar f:\dwg\misc\mktg\seaf-xx-xx.x-xx-xx-x-a-xx-k-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
.221 5.61 ref .161 4.09 ref .035 0.89 ref .074 1.88 ref .046 1.17 ref .076 1.93 ref .026 0.66 ref .066 1.68 ref .076 1.93 ref .100 2.54 ref .050 1.27 ref (typ) fig 12 -04: 4 row (seaf-20-05.0-xx-04-1-a-xx-k-tr shown) (all contacts, polyimide not shown for clarity) (same as fig1 except as shown ) c l 01 04 .170 4.32 ref .179 4.55 ref .199 5.05 ref .053 ref 1.35 .070 1.78 .610 15.49 ref .117 2.97 (typ) ref .186 (typ) 4.72 ref (no of pos x .050[1.27] + .416[10.57] .005 (no of pos x .050[1.27] + .533[13.54] - .010 + .005 wt-43-01-t (no of pos x .050[1.27] + .762[19.35] ref .221 5.61 ref .321 8.15 ref see options c l seaf-xx-05.0-xx-a-lp .117 2.97 (typ) ref .140 3.56 ref c l .070 1.78 ref .304 7.72 ref .010 0.25 wt-69-02-n see note 14 c .324 8.23 ref .070 1.78 .105 2.67 ref wt-69-01-t fig 13 -lp option (seaf-30-05.0-xx-06-1-a-lp-k-tr shown) (all contacts, polyimide not shown for clarity) (same as fig.12 except as shown ) (-lp option required for seac mate only) (only available with -05.0 lead style 4, 6, 8 & 10 row) fig 17 -pp option (seaf-30-05.0-xx-06-1-a-pp-k-tr shown) (all contacts, polyimide not shown for clarity) (same as fig 13 except as shown ) (-pp option valid for sear mate only) (only available with -05.0 lead style 6, 8 & 10 row) fig 16 -rp option (seaf-30-05.0-xx-06-1-a-rp-k-tr shown) (all contacts, polyimide not shown for clarity) (same as fig 13 except as shown ) (-pp option valid for sear mate only) (only available with -05.0 lead style 6, 8 & 10 row) ar sheet of .050 pitch socket array assembly by: seaf-xx-xx.x-xx-xx-x-a-xx-k-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 05/27/2004 6 5 sheet scale: 1:0.333333 revision ar f:\dwg\misc\mktg\seaf-xx-xx.x-xx-xx-x-a-xx-k-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
.221 5.61 ref .161 4.09 ref .035 0.89 ref .074 1.88 ref .046 1.17 ref .076 1.93 ref .026 0.66 ref .066 1.68 ref .076 1.93 ref .100 2.54 ref .050 1.27 ref (typ) fig 14 **-04: 4 row (seaf-30-08.0-xx-04-1-a-xx-k-tr shown) (all contacts, polyimide not shown for clarity) (same as fig 1 except as shown ) ** = not released for production c l 01 04 .249 6.32 ref .277 7.04 ref .053 ref 1.35 "h" "h" .017 ref 0.43 section "h"-"h" 'd' "c" "c" fig 15 crimp tail details (seaf-30-05.0-xx-08-x-a-xx-k-tr shown) (same as fig. 1 except as shown) (only available on -05.0, -06.0, -06.5, -07.5 lead styles) (all contacts, polyimide not shown for clarity) .025 .003 0.63 0.08 (typ) .035 .005 (typ) 0.89 0.13 .017 ref 0.42 .050 ref (typ) 1.27 section "c"-"c" scale 4 : 1 solder crimp c-305-xx.x-x c .004 0.10 (see note 5) "g" detail 'd' scale 4 : 1 c c c (see table 4) table 7 lead style "g" -05.0 .0330[0.838] -06.0 .0720[1.829] -06.5 .0920[2.337] sheet of .050 pitch socket array assembly by: seaf-xx-xx.x-xx-xx-x-a-xx-k-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 05/27/2004 6 6 sheet scale: 1:0.333333 revision ar f:\dwg\misc\mktg\seaf-xx-xx.x-xx-xx-x-a-xx-k-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
